Electronics Digital
Topseller
4154 H0 Universal catenary wire 240 – 270 mm, 3 pieces
€10.95*
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
8036 H0 MB Round bonnet 3-axle with long log truck, basic, functional model
€299.95*
Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: MERCEDES BENZ LAK 2624, 177 kW/240 HP Diesel motor.L 18 x W 3.3 x H 3.3 – 5.2 cm
Delivery time on request
8422 H0 Retrofit set rubber wheels for kibri trailers semitrailers, single tyre
€16.95*
With this set you can retrofit your kibri trailers or semitrailers to optimize the running smoothness and the tracking accuracy of the vehicle. This will improve the driving characteristics of the trailer resp. the semitrailer.Contents: 6 rubber wheels, 6 rims, 3 steel axles, 6 sockets.Suitable for trailer and semitrailer with up to 3 axles and single tyres.
available
8032 H0 MB ACTROS 3-axle tractor with concrete parts, rotating flashing lights, basic, functional model
€289.95*
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: DOLL 3-axle dolly.L 21.5 x W 3.5 x H 3.9 cm
Delivery time on request
4150 H0 Universal catenary wire 140 – 160 mm, 5 pieces
€11.95*
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
4124 H0 H-Profile middle mast
€16.50*
With 2 electrically insulated beams, filigree metal work. Middle crossarm: 3,4 cm. Height: 9,8 cm.
available
5215 2A Power module
€25.95*
The ideal solution for stable and powerful switching current as well as bright and flicker-free LED-lighting. To increase the switching power of digital decoders with separate voltage feed. For connection to the decoders items 5211, 5231 and 5280. Suitable for all decoders even from other producers in case an external power supply input is offered. One power module is able to supply up to 100 LED lights and several digital signals and decoders. Power rating: 2A.
available
5225 5A Power module
€37.50*
The ideal solution for stable and powerful switching current as well as bright and flicker-free LED-lighting. To increase the switching power of digital decoders with separate voltage feed. For connection to the decoders items 5211, 5231, 5280 and 5285 and digital signals. Suitable for all decoders even from other producers in case an external power supply input is offered. One power module is able supply to 200 LED lights or several decoders. Power rating: 5A. Protected against overload, a green LED indicates the readiness for operation.
available
5224 Control module for colour light signals digital/analogue
€66.95*
The module offers an integrated digital decoder (Märklin-Motorola, NMRA-DCC) and is used to control 2 colour light signals (one home signal and one distant signal) with LEDs and a common plus pole or bulbs, provided they do not draw more than 200 mA in total. Therefore, it is suitable for all signal scales 0 up to Z (except for the Viessmann signals with multiplex-technology). It can be activated in conventional mode via the push-button panels items 5545, 5546 and 5547 or via a digital signal. It is equipped with Viessmann Signalbus and can be configured for the following applications:- 2 or several aspect colour light signal: A 2-aspect home signal with the aspects proceed and stop requires the push-button panel item 5547 (for 4 signals) or a digital address. A signal with 3 or 4 aspects with the additional aspects proceed slowly and shunting permitted requires the push-button panel item 5546 (3-aspect, 2 signals) resp. item 5545 (4-aspect, 2 signals) resp. a digital operation 2-aspect.- Distant signal or block signal: When configured as a block signal the module responds automatically to the status of the corresponding track sector. This works only in conjunction with track occupancy detectors with continuous output. Per signal sector up to 2 track sectors are required. In this mode the module changes automatically to proceed if the following sector is clear (unoccupied). If one of the two sectors is occupied, the module switches to stop. - Own distant signal or distant signal on the same mast: The signal module controls the main signal and the corresponding distant signal or the distant signal of a following main signal mounted on the same mast. In that case the distant signal will show the dark aspect when the main signal shows stop. - Interrupt track supply or switch on brake generator when stop aspect is shown: With the relay for automatic train control item 5228 the module can stop trains automatically either by interrupting the track voltage in front of the signal or – more prototypical – with the digital brake module item 5232 (Märklin Motorola) or a brake generator (for NMRA DCC). This makes it possible in both analogue and digital mode to control the track by sections.Signal with aspects stop and proceed slowly: If required you can configure the module to permit these two aspects only. In that case the module can be activated via the push-button panel item 5547 or a digital address. Regardless if the module is triggered by push buttons or track contacts the logic always assures that the red button has preference if two or more devices provide conflicting commands.
available
5235 Decoder for C-Track, 3-way
€62.95*
Same as item 5231, single track decoder but for a Märklin C-track, three-way turnout. Controls 2 drives. Decoder can be controlled by loc addresses and can thus be used for driving devices unable to address switching decoders (such as the early Mobile Station and Roco Lokmäuse). Suitable for Märklin-Motorola, NMRA-DCC and Märklin systems.
available
5232 Digital brake module
€55.50*
The digital brake module provides prototypical slow starts and stops in front of a stop signal. Operating with all locomotive decoders, which support the Märklin braking track (Viessmann locomotive decoders, a lot of Märklin locomotive decoders and even more manufacturers). Special technology provides easy connection and compatibility with bidirectional operation. When stopping at the signal the light in the vehicles remains switched on.
available
52292 Double multiplexer for 2 colour light signals with multiplex-technology
€74.50*
Control module with integrated digital decoder (MM/ DCC) is for 2 Viessmann home signals with multiplex-technology, e. g. Ks-signals items 4042 – 4046 and standard light signals items 4721 – 4728 and is the best control for Viessmann signal bridge item 4750 equipped with signal heads items 4750 – 4753. The module controls 2 independent home signals and automatically identifies the connected signals. In case that home- and distant signal are one unit (Hp/Vr- combination), the signal heads can be controlled separately with an own address. Block distances operation with track control. Viessmann SpeedBus (LSB) provides comfortable connection with Viessmann Commander. Connected signal is recognized and configurated accordingly. Module has no Signalbus but offers control of distant signal by free addresses. The module recognizes the task of home signal and controls the distant signal. Connection of the signal is done by only one track connection. Smooth change of lighting between the signal pictures and more features are adjustable. For automatic train control item 5227 relay, double, monostable, 2 x 2UM direct connection is possible.
available
5230 Extension cable for s88-Bus, 1,5 m
€19.95*
Suitable for feedback decoder items 5217 and 5233, Viessmann Commander, Märklin s88 and Uhlenbrock Intellibox. Can be connected to an existing cable. This is a genuine cable extension.
Content: 1.5 m (€13.30* / 1 m)
available
5234 Extension module for track occupancy detector
€9.95*
Rail segments which are not monitored by timer track stop item 5208 or occupancy detector item 5233 should be supplied by this small module. It avoids the loss of feedback which could arise when rail vehicles drive across the insulations between the monitored and non-monitored rail segments. It also ensures that the voltage drop caused by the sensors of item 5233 is transferred to the non-monitored track, otherwise the trains would lose their speed when traversing between the rail segments.
available
5217 Feedback decoder for s88-Bus
€96.95*
Compatible with the s88. The feedback decoder can be used with the Märklin Interface, the Märklin Memory, Uhlenbrock Intellibox and Viessmann Commander. The 16 inputs of the module for track occupancy detection or for starting memory-switch sequences can be connected to the track contacts item 6840 or with Märklin K-and C-tracks directly to the contacts track section. Attached is a 15 cm length special cable and original s88 plugs. For 2 rail tracks the track occupancy detector item 5233 is recommended.
available
5233 Feedback decoder with track occupancy detector
€83.50*
Compatible with Viessmann Commander, Märklin digital systems (Märklin-Interface and Memory), Uhlenbrock Intellibox and Fleischmann Twin-Center. The 8 inputs of the decoder can be connected directly to the rail segments and are suitable for displaying the occupancy of the segments or to trigger Märklin Memory- or Intellibox. IB-switch functions and routes in the commander are directly connectable to the controlled track sections. The integrated electronic sensors can detect any vehicle which consumes current (locomotives, coaches equipped with lights or with resistors) on the isolated rail segments. FFor this purpose the middle rail of a 3-rail system, or one of the rails of a 2-rail system has to be isolated. Optocouplers in the module increase the reliability of operation. Track voltage is supervised, so the occupancy information is preserved even after a blackout. A 15 cm long flat cable with s88 plug is attached.
available
5231 H0 Decoder for C-track, 1-way
€38.50*
Digital turnout decoder for one turnout, suitable for Märklin and Trix C-track turnouts. A separate switching voltage input is possible! This provides a safe switching of the tracks even if several trains are operated at the same time. The decoder recognizes DCC and Märklin-Motorola format. It is also possible to operate decoders via loc addresses, thus offering operation with drive control units which cannot address switching decoders (e. g. early Mobile Station and Roco Lokmäuse).
available
5249 H0 Function decoder
€30.95*
RailCom compatible, compact multi protocol function decoder for DC, DCC (2- and 4-digit addresses) and Märklin Motorola, with automatic protocol recognition. All outputs are protected against overloading, in addition the decoder is protected against overheating. The decoder has a SUSI interface as well as a connection for external energy storage, on soldering pads. 6 function outputs with the following functionalities: Function mapping (freely programmable functional key allocation), dimming, flash, timer function for uncouplers. 2 outputs with 1 A permanently, 4 additional outputs with together 500 mA permanently. Dimensions: L ca. 2,5 x W 1,54 x H 0,33 cm.
available
5245 H0 Locomotive decoder with 8-pole interface plug
€30.95*
Miniature multi-protocol locomotive decoder suitable for RailCom, DC, DCC (2- and 4-digit addresses) and Märklin Motorola, with automatic protocol recognition. Adjustable minimum and maximum speeds as well as a freely programmable speed step table (28 steps), adjustable high frequency load regulation, also suitable for coreless motors, with 14, 28 and 128 speed steps and shunting mode. Drive current 1 A continuously, 1.8 A peak. 4 function outputs, with additional features: Function mapping, direction-dependent headlights, dimming, flashing. The max. current of the function outputs is 500 mA. All outputs are protected against overloading, in addition the decoder is protected against overheating. The decoder has a SUSI interface, as well as a connection for external energy storage, as soldering pads. Dimensions: L ca. 2,4 x W 1,42 x H 0,2 cm.
available
5244 H0 Locomotive decoder with cable
€30.95*
Miniature multi-protocol locomotive decoder suitable for RailCom, DC, DCC (2- and 4-digit addresses) and Märklin Motorola, with automatic protocol recognition. Adjustable minimum and maximum speeds as well as a freely programmable speed step table (28 steps), adjustable high frequency load regulation, also suitable for coreless motors, with 14, 28 and 128 speed steps and shunting mode. Drive current 1 A continuously, 1.8 A peak. 4 function outputs, with additional features: Function mapping, direction-dependent headlights, dimming, flashing. The max. current of the function outputs is 500 mA. All outputs are protected against overloading, in addition the decoder is protected against overheating. The decoder has a SUSI interface, as well as a connection for external energy storage, as soldering pads. Dimensions: L ca. 2,5 x W 1,54 x H 0,33 cm.
available
5211 Motorola digital decoder
€44.50*
8 impulse outputs to switch turnouts and other solenoid accessories.The switches for the setting of 80 possible addresses are accessible from the outside. An external power supply can be connected to reduce load, this ensures the reliable switching of accessories even in case of many trains. Powerful impulse outputs with short-circuit protection, max. current 2 A. Positive switching impulses. Compatible with the Commander, Märklin Digital and Uhlenbrock Intellibox.
available
52111 Motorola digital decoder light
€31.95*
Functions same as Motorola digital decoder item 5211, without its casing. Instead of sockets, this extremely economic version is equipped with soldering pads. 8 impulse outputs to switch turnouts and other solenoid accessories.The switches for the setting of 80 possible addresses are accessible from the outside. An external power supply can be connected to reduce load, this ensures the reliable switching of accessories even in case of many trains. Powerful impulse outputs with short-circuit protection, max. current 2 A. Positive switching impulses. Compatible with the Commander, Märklin Digital and Uhlenbrock Intellibox.
available
5213 Motorola digital switching decoder
€71.95*
Decoder to switch continuous current for colour light signals, lighting, motors, track or accessories. Compatible with Viessmann Commander, Märklin Digital and Uhlenbrock Intellibox. The switches for the setting of 80 possible addresses are accessible from the outside. It has 4 separate and independently controlled relays, max. current 2 A each. Supports both external supply and supply from the digital track.
available
5280 Multi protocol switching and turnout decoder
€59.95*
The decoder is a multi protocol decoder for DCC and Märklin Motorola. Suitable as a point decoder for 4 turnouts with double coils and controls 2 additional servos. Equipped with 4 output pairs, which can also be configurated with additional special functions. So lighting effects, blinking for road works or advertising are possible. The decoder recognizes settings of the turnouts with end position and informs postion by RailCom. Features: 4 pairs of turnout outputs (double coils). Switches positive voltage, outputs can also be configured as single outputs, power supply can be provided from the digital signal or from an external supply to reduce load. Many functions for the outputs: Impulse, constant or flashing outputs, adjustable output power, max. current 5 A each output, max. 5 A total. Max. current adjustable. LEDs indicate the states of the outputs. Programmable via the programming track and POM. Address can be also set with the push of a button. Supports RailCom. The speeds and end positions of the servos can be configured, power supply for both servos, total 300 mA constant, 450 mA peak. Screw terminals.
available
5285 Multi protocol switching decoder
€80.95*
Multi protocol decoder for DCC and Märklin-Motorola. Equipped with 4 powerful relays, and can control 2 servos.Features: 4 separate and galvanically isolated outputs, bi-stable outputs, switching position is preserved even without supply voltage. Supply provided by the track signal, continuous current up to 5 A each output, LEDs indicate the states of the outputs. Programmable via the programming track and POM. Address can be also set with the push of a button. Supports RailCom. The speeds and end positions of the servos can be configured, power supply for both servos: 300 mA total continuously, 450 mA peak. Screw terminals.
available
5229 Multiplexer for colour light signals with multiplex-technology
€62.95*
The module is equipped with an integrated digital decoder. Decoder recognizes Märklin-Motorola format and NMRA-DCC. The module is suitable for one home- and one distant signal with Viessmann multiplex-technology, e. g. Ks-signals items 4040 – 4046 and standard light signals with multiplex-technology items 4720 – 4730. Equipped with Viessmann signalbus and Viessmann SpeedBus and can be controlled by push-button panels, items 5545 – 5547 by track contacts or by digital switching commands. Viessmann SpeedBus provides comfortable connection to the Viessmann Commander with automatic registration. Equipment and configurability of this module are identical with that of the control module for light signals without multiplex-technology item 5224. The module is able to control block distance sections and can automatically stop the train with train control module item 5228. This can be done off interrupting the track coltage in front of the signal or, even more prototypical, in case of digital systems by switching to the braking module item 5232 (for Märklin-Motorola) or braking generator/ABC-braking (for NMRA-DCC). The signal connection is done by a single plug-in. Authentic smooth transition of signal aspects. It is equipped with button for address setting, DIP-switch for configuration and LED status display.
Delivery time on request
5296 N Locomotive decoder with cable - replaces 5240
€32.50*
Miniature multi protocol locomotive decoder suitable for RailCom, DC, DCC (2 and 4 -digit addresses) and Märklin Motorola, with automatic protocol recognition. Adjustable minimum and maximum speeds as well as a freely programmable speed step table (28 steps), adjustable high frequency load regulation, also suitable for coreless motors, with 14, 28 and 128 speed steps and shunting mode. Drive current 0.5 A continuously, 0.8 A peak. 2 function outputs for lights depending on direction, with additional features: Function mapping, dimming, flashing. The max. current of the function outputs is 300 mA. All outputs are protected against overloading, in addition the decoder is protected against overheating. The decoder has a SUSI interface, as well as a connection for external energy storage, as soldering pads. Dimensions: ca. L 1,15 x W 0,95 x H 0,21 cm.
available
5298 N Locomotive decoder with Next18
€32.50*
Miniature multi protocol locomotive decoder suitable for RailCom, DC, DCC (2 and 4 -digit addresses) and Märklin Motorola, with automatic protocol recognition. Adjustable minimum and maximum speeds as well as a freely programmable speed step table (28 steps), adjustable high frequency load regulation, also suitable for coreless motors, with 14, 28 and 128 speed steps and shunting mode. Drive current 0.5 A continuously, 0.8 A peak. 2 function outputs for lights depending on direction, with additional features: Function mapping, dimming, flashing. The max. current of the function outputs is 300 mA. All outputs are protected against overloading, in addition the decoder is protected against overheating. The decoder has a SUSI interface, as well as a connection for external energy storage, as soldering pads. Decoder identical to item 5296, but with Next18 plug. Dimensions: ca. L 1,55 x W 0,95 x H 0,21 cm (incl. plug).
Delivery time on request
5297 N Locomotive decoder with pin rail, 6 poles - replaces 5241
€32.50*
Miniature multi protocol locomotive decoder suitable for RailCom, DC, DCC (2 and 4 -digit addresses) and Märklin Motorola, with automatic protocol recognition. Adjustable minimum and maximum speeds as well as a freely programmable speed step table (28 steps), adjustable high frequency load regulation, also suitable for coreless motors, with 14, 28 and 128 speed steps and shunting mode. Drive current 0.5 A continuously, 0.8 A peak. 2 function outputs for lights depending on direction, with additional features: Function mapping, dimming, flashing. The max. current of the function outputs is 300 mA. All outputs are protected against overloading, in addition the decoder is protected against overheating. The decoder has a SUSI interface, as well as a connection for external energy storage, as soldering pads. Decoder identical to item 5296, but with 6-pole plug according to NEM 651 S. Dimensions: ca. L 1,56 x W 0,95 x H 0,21 cm (incl. plug).
available
5205 Power module with plug-in rail
€25.95*
A compact module for easy connection and bright flicker-free LED lighting. The plug-in rail on the top allows a comfortable connection of 12 loads without soldering, just by plugging the leads of resistors and diodes into the sockets of the plug-in rail. Ideal for the interior lighting sets items 6045 – 6048. Cables for connection to a transformer are included. Input voltage 16 V AC, output voltage approx. 22 V DC, max. current 400 mA continuously, overcurrent protection. Plug-in rail is extendable, e. g. item 6049. Provides up to 25 LED lights. Dimensions (without mounting): L 3,7 x W 2,6 x H 2,2 cm.
available