Form Signals
Topseller
4154 H0 Universal catenary wire 240 – 270 mm, 3 pieces
€10.95*
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
8036 H0 MB Round bonnet 3-axle with long log truck, basic, functional model
€299.95*
Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: MERCEDES BENZ LAK 2624, 177 kW/240 HP Diesel motor.L 18 x W 3.3 x H 3.3 – 5.2 cm
Delivery time on request
8422 H0 Retrofit set rubber wheels for kibri trailers semitrailers, single tyre
€16.95*
With this set you can retrofit your kibri trailers or semitrailers to optimize the running smoothness and the tracking accuracy of the vehicle. This will improve the driving characteristics of the trailer resp. the semitrailer.Contents: 6 rubber wheels, 6 rims, 3 steel axles, 6 sockets.Suitable for trailer and semitrailer with up to 3 axles and single tyres.
available
8032 H0 MB ACTROS 3-axle tractor with concrete parts, rotating flashing lights, basic, functional model
€289.95*
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlPrototype data: DOLL 3-axle dolly.L 21.5 x W 3.5 x H 3.9 cm
Delivery time on request
4150 H0 Universal catenary wire 140 – 160 mm, 5 pieces
€11.95*
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
4124 H0 H-Profile middle mast
€16.50*
With 2 electrically insulated beams, filigree metal work. Middle crossarm: 3,4 cm. Height: 9,8 cm.
available
4518 H0 Departure signal with LED
€15.95*
With filigree brass mast in authentic varnishing and base socket for easy mounting. Signal pictures Zp9. Maintenance free by LED lighting. Height: 5 cm.
available
4700 H0 Digital semaphore home signal, single-arm
€84.50*
With filigree latticed brass mast and authentic varnishing. Printed signal arms. Integrated multi protocol digital decoder for DCC/MM provides for an authentic arm movement. Slow signal movement due to special underfloor drive unit. Even authentic single bouncing is individually adjustable. In its delivery status, the bouncing is already adjusted. The compact overfloor drive is includes a decoder placed on the signal mast base. Maintenance free by LED lighting. Suitable for analogue and digital use. Configurable switching outputs can switch relays, e. g. for train control. Feedback via RailCom. For train control it is important to use a relay, due to the low maximum load of the contacts and the short pulse length, e. g. the electronic relay item 5552. With powerful low noise drive. Signal aspects Hp0 und Hp1. Height: 10,3 cm. Drive unit: L 3,5 x W 1,6 x H 0,45 cm.
available
4701 H0 Digital semaphore home signal, with 2 coupled arms
€99.95*
With filigree latticed brass mast and authentic varnishing. Printed signal arms. Integrated multi protocol digital decoder for DCC/MM provides for an authentic arm movement. Slow signal movement due to special underfloor drive unit. Even authentic single bouncing is individually adjustable. In its delivery status, the bouncing is already adjusted. The compact overfloor drive is includes a decoder placed on the signal mast base. Maintenance free by LED lighting. Suitable for analogue and digital use. Configurable switching outputs can switch relays, e. g. for train control. Feedback via RailCom. For train control it is important to use a relay, due to the low maximum load of the contacts and the short pulse length, e. g. the electronic relay item 5552. With powerful low noise drive. Signal aspects Hp0 und Hp2. Height: 10,3 cm. Drive unit: L 3,5 x W 1,6 x H 0,45 cm.
available
4702 H0 Digital semaphore home signal, with 2 uncoupled arms
€119.95*
With filigree latticed brass mast and authentic varnishing. Printed signal arms. Integrated multi protocol digital decoder for DCC/MM provides for an authentic arm movement. Slow signal movement due to special underfloor drive unit. Even authentic single bouncing is individually adjustable. In its delivery status, the bouncing is already adjusted. The compact overfloor drive is includes a decoder placed on the signal mast base. Maintenance free by LED lighting. Suitable for analogue and digital use. Configurable switching outputs can switch relays, e. g. for train control. Feedback via RailCom. For train control it is important to use a relay, due to the low maximum load of the contacts and the short pulse length, e. g. the electronic relay item 5226. With 2 powerful low noise drives. Signal aspects Hp0, Hp1 and Hp2. Height: 10,3 cm. Drive unit: L 3,5 x W 1,6 x H 0,45 cm.
Delivery time on request
4511 H0 Semaphore distant signal, disk and arm movable
€114.95*
With filigree brass mast and authentic varnishing. For authentic slow motion function only item 5216 slow speed resistor is required. Integrated main switching contacts arrange authentic stop. Next main signal shows stop. With printed signal disk and signal arm, bulbs and 2 underfloor drive units. Signal aspects Vr0, Vr1 and Vr2. Spare bulb: Item 6200. Height: 5,1 cm.
available
4510 H0 Semaphore distant signal, fixed disk, movable arms
€79.95*
With filigree brass mast and authentic varnishing. For authentic slow motion function only item 5216 slow speed resistor is required. Integrated main switching contacts arrange authentic stop. Next main signal shows stop. With printed signal disk and signal arm, bulbs and underfloor drive unit. Signal aspects Vr0 and Vr2. Spare bulb: Item 6200. Height: 5,1 cm.
available
4509 H0 Semaphore distant signal, movable disk
€75.50*
With filigree brass mast and authentic varnishing. For authentic slow motion function only item 5216 slow speed resistor is required. Integrated main switching contacts arrange authentic stop. Next main signal shows stop. With printed signal disk, bulbs and underfloor drive unit. Signal aspects Vr0 and Vr1. Spare bulb: Item 6200. Height: 5,1 cm.
available
4505 H0 Semaphore home signal Bavarian, single-arm
€66.95*
With filigree latticed brass mast and authentic varnishing, printed signal arm and underfloor drive unit with integrated automatic train control. Maintenance free by LED lighting. Signal aspects Hp0 and Hp1. Height: 10,3 cm. Mounting depth: 68 mm.
available
4508 H0 Semaphore home signal ÖBB, with 2 coupled, rebuilt arms
€92.95*
With filigree round mast rundged, made of brass, with authentic varnishing. Printed signal arms. Bulb and underfloor drive unit with integrated automatic train control. Signal aspects Hp0 and Hp2. Spare bulb: item 6200. Height: 10,3 cm.
available
4506 H0 Semaphore home signal ÖBB, with rebuilt arm, single-arm
€86.95*
With filigree round mast rundged, made of brass, with authentic varnishing. Printed signal arms. Bulb and underfloor drive unit with integrated automatic train control. Signal aspects Hp0 and Hp1. Spare bulb: item 6200. Height: 10,3 cm.
available
4501 H0 Semaphore home signal with 2 coupled arms **discontinued**
€70.95*
With filigree latticed brass mast and authentic varnishing, printed signal arms and underfloor drive unit with integrated automatic train control. Maintenance free due to LED lighting. Signal pictures Hp0 and Hp2. Height: 103 mm.
Delivery time on request
4503 H0 Semaphore home signal with 2 uncoupled arms and slow drive function
€121.95*
With filigree latticed brass mast and authentic varnishing, printed arms and 2 underfloor drive units with integrated automatic train control. Maintenance free due to LED lighting. Signal pictures Hp0, Hp1, Hp2. Height: 10,3 cm.
available
4500 H0 Semaphore home signal, single-arm **discontinued**
€61.95*
With filigree latticed brass mast and authentic varnishing, printed signal arms and underfloor drive unit with integrated automatic train control. Maintenance free due to LED lighting. Signal pictures Hp0 and Hp1. Height: 103 mm.
Delivery time on request
4530 H0 Semaphore home signal, small mast, single-arm
€65.95*
With filigree latticed brass mast and authentic varnishing. Printed signal arms. Underfloor drive unit with integrated automatic train control. Maintenance free by LED lighting. Signal aspects Hp0 and Hp1. Height: 10,3 cm.
available
4531 H0 Semaphore home signal, small mast, with 2 coupled arms
€77.50*
With filigree latticed brass mast and authentic varnishing. Printed signal arms. Underfloor drive unit with integrated automatic train control. Maintenance free by LED lighting. Signal aspects Hp0 and Hp2. Height: 10,3 cm.
available
4532 H0 Semaphore home signal, small mast, with 2 uncoupled arms
€121.95*
With filigree latticed brass mast and authentic varnishing. Printed signal arms. Underfloor drive unit with integrated automatic train control. Maintenance free by LED lighting. Signal aspects Hp0, Hp1 and Hp2. Height: 10,3 cm.
available
4515 H0 Semaphore stop signal with earth socket
€59.95*
With filigree brass mast, authentic varnishing and underfloor drive unit. Disk is movable and lighted. Maintenance free by LED lighting. Different kinds of block signals are possible. Whereas block signal item 4517 is a version with flange socket which is single standing by the track, block signal item 4515 is a lower standard version. It is used e. g. directly in front of a home signal. Signal aspects Sh0 and Sh1. Height: 5,5 cm.
available
4517 H0 Semaphore stop signal with flange socket
€59.95*
With filigree brass mast, authentic varnishing and underfloor drive unit. Disk is movable and lighted. Maintenance free by LED lighting. Different kinds of block signals are possible. Whereas block signal item 4517 is a version with flange socket which is single standing by the track, block signal item 4515 is a lower standard version. It is used e. g. directly in front of a home signal. Signal aspects Sh0 and Sh1. Height: 6,5 cm.
available
4516 H0 Semaphore stop signal, lower type
€55.95*
With underfloor drive unit. Disk is movable and lighted. With one LED, maintenance free. Different kinds of block signals are possible. These ground signals are without mast and used with small track distances less than 4,5 m (H0 about 5,17 cm). Signal aspects Sh0 und Sh1. Height: 1,5 cm.
available
4519 H0 Wait signal with light
€26.95*
With filigree brass mast, authentic varnishing and base socket for easy mounting. With 3 LEDs, maintenance free. Signal aspect Ra11. Height: 6,5 cm.
Delivery time on request
4551 Motion drive for signals
€35.50*
With a slow motion drive as well as a freely useable closing contact up to 2 A. The control of the drive is followed by an impulse of 16 V. Due to the built-in switch impulses DC operation is possible, too. Current consumption at the point of switching is 0,7 A. Technical data: Operating displacement: 0,5 cm, actuation wire: 9 cm, actuation power: 0,1 N (ca. 10 g), actuation speed: approx. 1 cm/s. Dimensions drive unit: Ø 1,3 cm, L 6,79 cm, cover plate: L 1,5 x W 1,5 cm.
available